网站标志
点评详情
点评详情
发布于:2019-11-19 01:19:36  访问:37 次 回复:0 篇
版主管理 | 推荐 | 删除 | 删除并扣分
First, Locate The Right Instructions If You Want To Change Your Car Hifi
Unbolt the Car Stereo. With the head unit attachments exposed, it is time to actually remove the vehicle radio in the dash. In this auto pictured above, the stereo has been held by four screws, so the next step is to eliminate them, set them in a secure location, then carefully pull off the head unit free of the dashboard.
Put Everything Back the Way You Discovered It. Once you`ve your new automobile radio wired , you`ll have to gently place it into the dash and turn off your ignition into the attachment position. Confirm that the radio works. If it doesn`t, neues Radio einbauen double check your plumbing project. After you`re satisfied that your new radio works, you are in the home stretch. All of the tough parts are supporting you, and everything you need to do is simply reverse the removal process. Generally, completing the task is just be a matter of plugging the brand new head unit set up, popping the trim piece back on, and cranking up your brand-new stereo.
In some cases, you might need to disconnect a variety of switches, and it is vital to not yank the wires out. Some vehicles also have climate controls that are attached to drains, vacuum lines, along with other components. In the event you harm these components by pulling too forcefully, the heating system, venting, and air-conditioning may not work properly once you reassemble everything. When you have unplugged all the switches, you should be in a position to pull the trim or bezel totally free.
Auto Stereo Wiring Options: Check the Plugs. The easiest way to put in a new car radio is to work with a replacement head unit that is compatible with the current wiring harness plug. This limits the number of head units you can use, though. In the vehicle pictured above, the plug and connector clearly don`t match. There are a number of diverse ways to manage that circumstance. The simplest way is to obtain an adapter harness. If you discover a harness that`s designed especially for your head unit and vehicle, you may just plug it in and move. You may also be able to find a harness which you could cable into the pigtail which came with your new head unit. The other option is to cut off the harness which was attached to a factory radio and cable the aftermarket pigtail directly into it. In the event you choose to go that route, you can utilize either crimp connectors or solder.
Popping in a new head unit is among the easiest upgrades you can do to your vehicle, therefore it is a terrific place for an inexperienced do-it-yourselfer to start. A brand new stereo may enhance the functioning of your car sound system, give you access to all of the HD radio stations in your town, or even add a satellite radio, DVD player or quite a few other interesting choices. When you loved this short article and you wish to receive more details about neues Radio verkabeln assure visit our web site. It is fairly simple for a car audio upgrade to snowball into a enormous job, but when you are only replacing an older unit with a fresh one, it is usually fairly simple.
This means is that first step in replacing a car radio would be to expose each the screws, screws, bolts, or other fasteners that hold the head unit in place. Typically, you will need to remove some form of trimming bit, or trimming bits, to access the attachments. These trim pieces sometimes pop straight out, but a number of them have concealed screws on the other side of the ashtray, switches, or plugs. Once you have eliminated all of the screws, then you can add a flat blade screwdriver or prying tool and attempt to pop up the trim piece off.
共0篇回复 每页10篇 页次:1/1
共0篇回复 每页10篇 页次:1/1
我要回复
回复内容
验 证 码
看不清?更换一张
匿名发表 
脚注信息
Copyright (C) 2009-2010 All Rights Reserved. 365体育官网|传承典范
服务时间:周一至周日 08:30 — 20:00  全国订购及服务热线:021-98765432 
联系地址:上海市某某路某大厦20楼B座2008室   邮政编码:210000